ESPECIFICACIONES:

Rockford Fosgate P1 12” is the first in a family of famous “Punch” subwoofers for cars and trucks. The P1S4-12 features a 4-Ohm voice coil, 250 Watts RMS power handling, and can accommodate a grille insert using the included soft touch ABS trim ring. The P1S4 12 inch car subwoofer also includes:

• Linear spider with embedded 16 AWG tinsel leads
• High-temp voice coil with spun-laced Nomex® re-inforcement collar
• Kevlar fiber reinforced paper cone
• StampCast basket with integrated spider venting
• Soft touch ABS trim ring with optional grille
• Custom 10-AWG nickel plated push terminals
• Extended pole piece and bumped vented backplate
• Protective PVC textured magnet cover

ESPECIFICACIONES:

Car Audio Fanatics wanting big bass can rely on the Prime R2D2-12 subwoofer. This 12” subwoofer handles 250 Watt RMS and the 2-Ohm Dual Voice Coil design lets you to wire them in various configurations.

• 12 AWG compression terminals
• Anodized aluminum voice coil former
• Optimized for both sealed and vented enclosures
• Mica injected polypropylene cone
• Linear spider with embedded 16 AWG tinsel leads
• StampCast basket with integrated spider venting
• Integrated PVC trim ring

ESPECIFICACIONES:

The P3D2-12 is the best performing Rockford Fosgate Punch series subwoofer. Built to max out your car audio system, the P3 12” features Dual 2-Ohm voice coils (DVC), 600 Watts RMS of power handling, and accommodates a grille insert using the included cast aluminum trim ring. The  P3D2-12 12 inch car subwoofer also includes:

• Custom 10-AWG nickel plated push terminals
• Dual linear spider with embedded 16 AWG tinsel leads
• Extended pole piece and bumped vented backplate
• High-temp voice coil with spun-laced Nomex® re-inforcement collar
• Anodized aluminum cone and dustcap
• Protective PVC textured magnet cover
• Diamond cut cast aluminum trim ring with optional grille
• StampCast basket with integrated spider venting

ESPECIFICACIONES:

The Rockford Fosgate P2 12” subwoofer continues “The PUNCH” tradition of generating powerful car and truck audio. The P2D2-12 features a 2-Ohm Dual voice coil (DVC), 400 Watts RMS power handling, and can accommodate a grille insert using the included cast aluminum trim ring. The P2D2 12 inch car subwoofer also includes:

1. Dual linear spider with embedded 16 AWG tinsel leads
2. Custom 10-AWG nickel plated push terminals
3. Extended pole piece and bumped vented backplate
4. High-temp voice coil with spun-laced Nomex® re-inforcement collar
5. Protective PVC textured magnet cover
6. Kevlar fiber reinforced paper cone
7. StampCast basket with integrated spider venting
8. Diamond cut cast aluminum trim ring with optional grille

ESPECIFICACIONES:

• Potencia Max 250W 
• Potencia RMS 125W 
• Impedancia 4 ohms 
• Tecnologia FLEXFIT 
• Cono de fibra reforzada

"PM"series created by Rockford Fosgate distributor in Panama is the best trunk audio midrange driver. 
Achieves high efficiency fiber mixed paper cones, giant ferrite magnets, stamp frame adoption and brings an energetic sound. 

[Specification] 
-20 Cm midrange drivers. 
• Max input: 250 W 
-Rated input power: 125 W 
-Nominal impedance: 4 Ω 
-Frequency response: 80 Hz ~ 5 kHz 
-Efficiency: 95 dB 
-Mounting hole diameter: 181 mm 
-Mounting depth: 74 mm 
● speaker Grill: size （ width × height ） 212 x 23.3 mm 

ESPECIFICACIONES:

• 1-1/2" Punch Series Car Tweeter
• Power Handling:Recommended power range: 15 - 50 watts RMS
• Peak: 100 watts
• RMS: 50 watts
• 4 ohms impedance, also available in 8 ohms
• Machined Aluminum bullet tweeter construction
• High-temperature voice coil
• Integrated 6dB high-pass crossover filter
• Flush mountable basket design
• CEA-2031 compliant tweeter
• Designed for high SPL systems
• Sensitivity: 105dB
• Frequency response: 4,000-20,000 Hz
• Top-mount depth: 2-5/8"

ESPECIFICACIONES:

• 12" Single 4 Ohm Cobalt Series Subwoofer
• Power Handling:
• Peak: 500 watts
• RMS: 200 watts
• Impedance: Single 4 Ohm
• UV-treated paper cone woofer
• Nitrile-butadiene rubber surround
• Polypropylene dust cap
• Custom stamped steel frame
• Interlaced Conex spider
• Stitched and looped tinsel leads
• Rugged spring terminals up to 10-gauge
• 3-stage vented back plate
• 1.5" high temperature copper voice coil with Kapton former
• Frequency response: 25-250 Hz
• Sensitivity: 87.2 dB

ESPECIFICACIONES:

• APK Series Monoblock Class D Car Amplifier
• RMS Power Rating:Max power output: 4500 watts
• 4 ohms: 1350 watts x 1 chan.
• 2 ohms: 2500 watts x 1 chan.
• 1 ohm: 4300 watts x 1 chan.
• High purity copper trace circuit boards
• Wired remote bass level control included
• Variable Bass Boost (0 to +9 dB bass boost at 45 Hz)
• Mono channel operation
• Variable low-pass filter (35-250 Hz, 24 dB/octave)
• Subsonic filter (24 dB at 10-50 Hz)
• 0/1 gauge power and ground wiring is required for installation