ESPECIFICACIONES:

• 10" Amplified Bass Enclosure
• Power Handling (RMS/Peak):
• 175/350 watts
• Nominal Impedance: 4-ohm
• Frequency Response: 33Hz - 250Hz
• Efficient Poly Cone Woofer Application specific woofer with NBR rubber surround
• Bulit-in Class A/B Amplifier High Powered MOSFET Amplifier
• Stylish Two-tone Vinyl RFG aviation grade vinyl for high wear resistance
• Computer Optimized Acoustic Chamber
• Perfectly tuned for the automotive environment
• 12dB Bass EQ Circuitry Variable BASS EQ
• @45Hz for precise bass tuning
• High / Low Input Compatible with OEM or aftermarket radios
• Variable Remote Level Control (Included)
• Height: 12.25 in
• Width: 17 in
• Top Depth: 11.4 in
• Bottom Depth: 13.75 in

ESPECIFICACIONES:

• Size: 10"
• Power Handling (RMS/Peak): 200/400 watts
• Nominal Impedance: Single 4-ohm
• Voice Coil Size: 2" KSV
• Frequency Response: 31Hz-500Hz
• Sensitivity: 85 dB
• Motor Structure: 120 oz.
• Cutout Diameter: 9 1/8" (230.1mm)
• Mounting Depth: 5.12 in
• VC Impedance: 4 ohms
• Test Impedance: 3.4 ohm
• Fs: 38.0 Hz
• SD: 333.3 sqCM
• Vas: 29 Ltr
• Cms:  135 µM/N
• Mms: 82 g
• BL™: 10.9
• Qms: 4.2
• Qes: 0.72
• Qts: 0.68
• No:  0.3
• Spl: 90 dB
• Xmax: 9.5 mm

ESPECIFICACIONES:

• Air Suspension Bass - One Piece Injection Molded Cone
• 2" Vented KSV Voice Coil Formers
• Large Roll Rubber Surrounds
• Computer Optimized Acoustic Chamber
• Custom Mounting Brackets
• Single 10-inch Loaded Thin Mount Enclosure
• Power Handling (RMS/Peak): 275/550 watts
• Nominal Impedance: Single 4-ohm Input
• Frequency Response: 38Hz - 280Hz

ESPECIFICACIONES:

• 8" Single 4-Ohm Subwoofer
• 200 watt RMS/400 Watts Max
• Proprietary Non-pressed Paper DDC Coated Cone 
• High Roll Santoprene® Surround
• 2.0" Vented BASV Voice Coil Former
• Perimeter Aero-Vent Voice Coil Cooling Vents
• Proprietary Non Resonance Polycarbonate/Glass Fiber Basket
• Chrome Push Terminals
• Optimally Designed for Both Small Sealed or Ported Enclosures 

ESPECIFICACIONES:

• 10" Dual 4-Ohm Subwoofer
• 350 watt RMS/700 Watts Max
• Proprietary Non-pressed Paper DDC Coated Cone 
• High Roll Santoprene® Surround
• 2.0" Vented BASV Voice Coil Former
• Perimeter Aero-Vent Voice Coil Cooling Vents
• Proprietary Non Resonance Polycarbonate/Glass Fiber Basket
• Chrome Push Terminals
• Optimally Designed for Both Small Sealed or Ported Enclosures

ESPECIFICACIONES:

• 10" Shallow Mount Single 4-Ohm Subwoofer
• 350 Watts RMS/700 Watts Max
• Proprietary Single Piece Injection Molded Flat Cone Design
• High Roll Santoprene® Surround
• 2.0" Vented KSV Voice Coil Former
• Perimeter Aero-Vent Voice Coil Cooling Vents
• Proprietary Non Resonance Polycarbonate/Glass Fiber Basket
• Chrome Push Terminals 
• Optimally Designed for Small Sealed Enclosures

ESPECIFICACIONES:

• 10" Single 4-Ohm Subwoofer
• 275 watt RMS/550 Watts Max
• Proprietary DDC Coated Paper/Wool Cone
• Pressed 4-Layer Large Roll Foam Surround
• 2" Vented BASV Voice Coil Former
• Perimeter Aero-Vent Voice Coil Cooling Vents
• Non Resonance DDC Coated Stamped Steel Basket
• Rubber Mounting Gasket/Trim Ring
• Chrome Push Terminals
• Optimally Designed for Both Small Sealed or Ported Enclosures 

ESPECIFICACIONES:

10" DVC Flat Subwoofer / 500 Watts / Dual 4 Ohm Voice Coil

Features:

• 3”, 4 layer Dual 4 Ω Voice Coil
• Ultra Shallow Stamped Steel Frame Design
• PP Coated Paper Cone with Foam Surround
• Paper Sub Cone
• Ferrite Magnet
• Black Finished Top and Bottom Plates
• Mixed Cotton Spider
• PVC Trim Ring/Gasket
• Heavy Gauge Spring Terminals

ESPECIFICACIONES:

• 10" Single 4 ohm GT Series Subwoofer
• Power Handling:
• Peak: 1100 watts
• RMS: 250 watts
• Impedance: Single 4 ohms
• Polypropylene cone woofer
• High-roll rubber surround
• Progressive spider
• Vented pole piece
• Fully vented motor structure
• Rubber coated tinsel leads
• Dual stacked oversized magnet structure
• Frequency response: 30-500 Hz
• Sensitivity: 88 dB

ESPECIFICACIONES:

El KFC-W2513PS de 10 pulgadas te ofrece el sonido subgrave que buscas a un bajo costo. Este sub maneja 1000 Watts de potencia y cuenta con un cono de polipropileno de goma con un gran sonido envolvente. Este altavoz es funcional e incluye un anillo reversible reversibles e incluye un anillo que te permite colocarlo fuera del cono.

• Cono Con Textura de Fibra
• Bobina móvil de 2 Capas de 4 Ohms
• Cubierta de Magneto
• Araña de Suspensión Super Liner 2
• Terminales de conexión de presión (acepta 8AWG)
• Borde de suspensión de Uretano
• Potencia de entrada RMS KFC-W2513: 300watts
• Potencia Máxima 1000W